Category: Hygiene and protection test equipment
Introduction: Applicable scopeThis constant temperature and humidity environment test chamber can simulate various temperature and humidity environments and is suitable for testing electronic, electrical, food, automotive, rubber, plastic, metal and other products.…
This constant temperature and humidity environment test chamber can simulate various temperature and humidity environments and is suitable for testing electronic, electrical, food, automotive, rubber, plastic, metal and other products. It meets the reliability and stability performance parameters of GB/T 2423 and GJB 150A1/4 in various harsh environments. It will provide you with a basis for predicting and improving product quality and reliability.
GB 6529, ASTM D 1776, GB 11158, GB 10589-89, IEC 60068-2-2.1974, GJB 150.3, GJB 150.4, GJB 150.9 and other standards.
1. Using a 5-inch TEMI850 color touch screen, the display is intuitive and easy to operate, with the function of saving historical data.
2. Appointment on/off function, end planning setting, automatically save data curves during power outage, etc.
3. At the end of the experiment, the tested product will automatically return to room temperature to avoid frost and condensation protection mechanism.
4. The use of servo refrigerant flow control technology effectively achieves energy savings of over 30%.
5. The experimental cycle is conducted without affecting the impact time.
6. Using pure aluminum finned evaporators effectively reduces energy storage time and saves energy.
1. Studio size: 400 x 400 x 500mm
2. External dimensions: 1000 x 970 x 1450mm
Continuous PID regulation, using AC contactors as heating actuators, safe and reliable, with a separate over temperature protection system.
To ensure a high uniformity index, the test box is equipped with an internal circulating air supply system; In the air duct interlayer at one end of the studio, devices such as heaters, refrigeration evaporators, and fan blades are distributed; Use a fan to circulate the air in the box. When the fan rotates at high speed, the air in the studio is sucked into the air duct from the bottom, heated and cooled, and blown out from above the air duct. The air exchanged with the test sample in the studio is then sucked into the air duct and circulated repeatedly to meet the temperature setting requirements.
|
1) 5-inch color touch screen
|
|
1) The high energy efficiency ratio is 12% higher than the advanced piston compressors currently on the market. |
|
Advantages of stainless steel finned electric heating tubes
|
|
Physical properties |
|
[Fan characteristics] |
|
1) Fin type: corrugated or flat.
|
|
Specification: 100 gallon Taiwan branded Dengyuan water pump, universal for household pure water machines Volume:18×10×10cm³ |
|
[Features]
|
Name |
Brand |
Origin |
Temperature controller |
TEMI850 |
Korea |
Electromagnetic contactor |
your Welfare |
Taiwan |
Thermal relay |
your Welfare |
Taiwan |
Solid state relay |
Aix |
Hong Kong |
Intermediate relay |
Aix |
Hong Kong |
Sensors |
Songqi |
Taiwan |
Time relay |
Songling |
Taiwan |
No fuse switch (air switch) |
Shilin |
Taiwan |
Button switch |
JinHongDa |
Taiwan |
Liquid expansion gas switch |
RAINBOW |
Korea |
Motor |
Yutian |
Taiwan |
Wind turbine |
Jianyu |
Taiwan |
Compressor |
Taikang |
France |
Electromagnetic valve |
Egret Palace |
Japan |
Drier |
DANFOSS |
Denmark |
Condenser |
Zhongli |
Taiwan |
Evaporator |
Zhongli |
Taiwan |
Heater |
Taide |
Taiwan |
Buzzer |
Kingstate |
Taiwan |
Condenser fan |
Mar |
Germany |
Refrigerant |
DuPont |
USA |
Refrigeration oil |
SUN |
USA |
Fluorescent lamp ballast |
OSRAM |
Germany |
Heat exchanger |
ALFA LAVAL |
Switzerland |
Textile instruments are suitable for testing the color fastness of printed and dyed textiles to dry, wet friction, and brushing friction. General textile testing…
The fabric induction static electricity tester is mainly used in the laboratory to identify the static electricity performance of textiles such as fibers, yarns,…
The application of fabric strength machines in industrial production is very extensive, and their automatic control system is an important component of work. In …
1. The operators of textile instruments should use the equipment correctly, strictly follow the operating procedures, prepare carefully before starting, check re…
1. Keep tight. Textile instrument manufacturers introduce that during the use of material testing machines, due to the vibration during testing, it is easy to ca…
Fabric strength machine is a device used for testing the mechanical properties of textiles, such as stretching, tearing, bursting, constant elongation, constant …